DOS ODI, NDIS 2.01 Clients
Edit the NET.CFG or PROTOCOL.INI file. Add these keywords to the Link Driver section:
FORCEDUPLEX 2
SPEED 100 (or 10 if
NetWare Server
In AUTOEXEC.NCF, load E100B.LAN and add the following statement (you must include the equal sign for servers):
FORCEDUPLEX=2 SPEED=100 (or 10 if
For more information, see the readme file for NetWare servers.
Windows NT
While running Windows NT:
1.From the Control Panel,
2.PROSet examines your system and displays the Controller Setup window.
If you have multiple adapters, click the Show All Adapters box and then select the adapter you are configuring (you can identify it by its Ethernet address). Each adapter must be configured separately. For more information, refer to Installing Multiple Adapters on page 11.
3.From the window that appears, click Settings. You’ll see the Adapter Setup window.
4.Click the menu for Network Speed.
5.Click 100 or 10 Mbps, depending on switch speed.
6.Click the menu for Duplex Mode.
7.Click Full.
8.Click OK.
9.Click Restart Windows NT.
Select Duplex Mode (Optional) 13