Note:

For more information about Adapter Fault Tolerance, see the Adapter Fault Tolerance readme files on the Configuration and Drivers disk.

To use Adapter Fault Tolerance, you must have at least two PRO/100+ adapters installed in your Windows NT 4.0 or NetWare 4.x workstation or server and they must be linked to the same network.

Setting up Adapter Fault Tolerance in Windows NT 4.0

Setting up AFT in Windows NT 4.0

1.Double-click the Network icon in the Control Panel.

2.On the Adapters tab, select a PRO/100+ adapter that will be in the team and click Properties.

3.Click Adapter Teaming in the PROSet window.

4.Click OK when prompted. You’ll see the Adapter Teaming Configuration window.

5.Follow the instructions for assigning adapters to a team. Adapter Fault Tolerance supports up to four adapter teams, two adapters per team.

6.Select AFT Only in the Team Function area.

7.Click OK and then click Close to finish. When prompted, restart your computer.

Deleting a Team

Deleting a Team

1.Double-click the Network icon in the Control Panel.

2.On the Adapters tab, select the AFT team to delete.

3.Click Remove. A confirmation dialog appears. Click Yes.

4.Click Close. Restart when prompted.

16 Intel EtherExpress PRO/100+ TX PCI LAN Controller User’s Guide