Intel PRO/100 To Install PROSet, Manually Adding the OBEC, Install the PROSet Software (Optional), Manually Adding an OnBoard Ethernet Controller

Install the PROSet Software (Optional)

PROSet is an enhanced utility you can use to easily configure and test your OBEC in Windows 95. PROSet also displays the computer resources that are assigned to each adapter you install.

To Install PROSet

1.Insert the Configuration and Drivers disk in the disk drive.

2.From My Computer or the Windows Explorer, double-click the 3½ Floppy disk icon.

3.Click the PROSet icon or filename and click the right mouse button. From the menu that appears, click Install.

4.The PROSet files are copied to your hard disk.

5.To start PROSet, double-click on the PROSet icon in the Control Panel

6.The PROSet software examines your computer and displays the main window.

7.Click OK to exit PROSet and return to Windows 95.

Manually Adding an OnBoard Ethernet Controller

If the New Hardware Found dialog box does not appear at startup and you cannot connect to the network, check the Device Manager list to see if the new adapter is present.

Manually Adding the OBEC

1.From the Control Panel, double-click the System icon.

2.Click the Device Manager tab.

3.Double-click Other Devices (question mark icon) in the list area.

4.Double-click PCI Ethernet Controller.

5.Click the Driver tab, then click Change Driver.

4 Intel EtherExpress PRO/100+ TX PCI LAN Controller User’s Guide