Note:

Fast EtherChannel must be loaded before the PRO/ 100+ adapter driver, E100B.LAN, or any other LAN driver.

Deleting a Team

Deleting a Team

1.Double-click the Network icon in the Control Panel.

2.On the Adapters tab, select the FEC team to delete.

3.Click Remove. You’ll see a confirmation dialog. Click Yes.

4.Click Close. Restart when prompted.

Setting up FEC in NetWare

Setting up FEC in NetWare

1.Copy the following lines from the EXAMPLES.TXT file (on the Configuration and Drivers disk) and paste them into the appropriate files. These commands assume the AFT.NLM and E100B.LAN files are in the system directory of your workstation. (Files must be copied from the Configuration and Drivers disk to your workstation's hard drive).

Copy this line into the STARTUP.NCF file

;- Load Fast EtherChannel load aft

Copy these lines into the AUTOEXEC.NCF file

;- Load LAN driver on 1st controller load e100b slot=7 frame=ethernet_802.2 name=pri_802.2

;- Load LAN driver on 2nd adapter load e100b slot=8 frame=ethernet_802.2 name=sec_802.2

;- Bind ipx to 1st controller bind ipx pri_802.2 net=2

;- Set the 2nd adapter to be a Fast EtherChannel Partner to

;- the first controller

aft fec 7 8

22 Intel EtherExpress PRO/100+ TX PCI LAN Controller User’s Guide