Intel PRO/100 4

iv Gateway ALR 8200 Rack Mount User’s Guide

Contents

Page Trademark Acknowledgments Contents Page Introduction Connect the Network Cable To Connect the Network Cable Configure the Controller and Install Drivers Windows Installing Network Drivers from Diskette To Install PROSet Manually Adding the OBEC Windows NT Server or Workstation Installing Windows NT 4.0 Drivers Installing the Windows NT 3.51 Drivers DOS and Windows 3.1 Setup for Novell NetWare Clients Installing NetWare/DOS Drivers SETUP ENTER 5.When Setup finishes the tests, you’ll see the Install Network Drivers screen LINK DRIVER E100BODI •Verify that the frame type in your NET.CFG file matches your network •If setting up a server, check your LOAD and BIND statements Testing with a Responder on the Network Installing Multiple Adapters Select Duplex Mode (Optional) While running Windows NT: While running Windows 95: Setting Up Adapter Fault Tolerance Only Setting up AFT in Windows NT Deleting a Team Setting up AFT in NetWare Setting Up Adaptive Load Balancing Setting up ALB in Windows NT Setting up ALB in NetWare Page Setting -UpFast EtherChannel Setting up FEC in Windows NT Setting up FEC in NetWare Page Troubleshooting and FAQs If the OnBoard Ethernet Controller Can’t Connect to the Network Testing the Controller (Diagnostics) Frequently Asked Questions (FAQs) Page Technical Information PCI Installation Tips “Push” Installation for Windows Fast Ethernet Wiring Fast Ethernet Hubs and Switches Shared hubs Switching hubs Network Software License Agreement