4.Click OK when prompted. You’ll see the Adapter Teaming Configuration window.

5.Follow the instructions to assign adapters to a team. ALB supports up to two adapter teams, with two, three, or four adapters per team.

6.Select Load Balancing in the Team Function area.

7.Click OK and then click Close to finish. When prompted, restart your computer.

Deleting a Team

Deleting a Team

1.Double-click the Network icon in the Control Panel.

2.On the Adapters tab, select the ALB team to delete.

3.Click Remove. A confirmation dialog appears. Click Yes.

4.Click Close. Restart when prompted.

Setting up ALB in NetWare

Setting up ALB in NetWare

1.Copy the following lines from the EXAMPLES.TXT file (on the Configuration and Drivers disk) and paste them into the appropriate files. These commands assume the AFT.NLM and E100B.LAN files are in the system directory of your workstation. (Files must be copied from the Configuration and Drivers disk to your workstation's hard drive).

Copy this line into the STARTUP.NCF file

;- Load Adaptive Load Balancing load aft

Note:

Adaptive Load Balancing must be loaded before the PRO/100+ adapter driver, E100B.LAN, or any other LAN driver.

Choose Ethernet Controller Teaming Options 19