10. Connect the processor fan cable to the processor fan connector (see Figure 15).
TP00201
Figure 15. Connecting the Processor Fan Cable to the Processor Fan Connector
Removing the Processor
To remove the processor, follow these instructions:
1.Observe the safety and ESD precautions at the beginning of this chapter.
2.Disconnect the processor fan cable.
3.Open the levers on the heat sink.
4.Disengage the retention mechanism hooks at the bottom of the heat sink.
5.Lift the heat sink from the processor.
6.Lift the processor lever.
7.Remove the processor.
48 | Intel Server Board |
