Table 16 shows the function keys available for menu screens.
Table 16. BIOS Setup Program Function Keys
BIOS Setup Program Function Key | Description |
|
|
<← > or <→ > | Selects a different menu screen. |
|
|
<↑ > or <↓ > | Moves cursor up or down. |
|
|
<Tab> | Moves cursor to the next field. |
|
|
<Enter> | Executes command or selects the submenu. |
|
|
<F9> | Load the default configuration values for the current menu. |
|
|
<F10> | Save the current values and exits the BIOS Setup program. |
|
|
<Esc> | Exits the menu. |
|
|
Maintenance Menu
This menu is used to clear passwords and to access processor information. Setup only displays this menu when the BIOS Configuration jumper is in the configure mode. See page 58 for information about setting the configure mode. To access this menu, select Maintenance on the menu bar at the top of the screen.
Maintenance
Main | Advanced | Security | Power | Boot | Exit |
|
|
|
|
|
|
Table 17. Maintenance Menu
Feature | Options | Description | |
|
|
| |
CPU Frequency | • 8 to 1 ratio (default) |
| |
| • 12 to 1 ratio through |
| |
|
| 39 to 1 ratio |
|
|
|
|
|
Clear All Passwords | • | Ok (default) | Clears the user and administrative passwords. |
| • | Cancel |
|
|
|
|
|
Clear BIS Credentials | • | Ok (default) | Clears the Wired for Management Boot Integrity |
| • | Cancel | Service (BIS) credentials. |
|
|
| |
CPU Stepping Signature | No options | Displays CPU’s Stepping Signature. | |
|
|
| |
CPU Microcode Update | No options | Displays CPU’s Microcode Update Revision. | |
Revision |
|
|
|
|
|
|
|
Configuration Software and Utilities | 69 |