Primary/Secondary/SATA-0/SATA-1 Master/Slave Submenus
To access these submenus, select Advanced on the menu bar, then Drive Configuration, and then the master or slave to be configured.
Maintenance Main
Advanced
Security Power Boot Exit
PCI Configuration
Boot Configuration
Peripheral Configuration
Drive Configuration
Floppy Configuration
Event Log Configuration
Video Configuration
USB Configuration
Chipset Configuration
Fan Control Configuration
Hardware Monitoring
Remote Access Configuration
There are four IDE submenus: primary master, primary slave, secondary master, and secondary slave. Table 24 shows the format of the IDE submenus. For brevity, only one example is shown.
Table 24. Primary/Secondary/SATA-0/SATA-1 Master/Slave Submenus
Feature | Options | Description | |
|
|
| |
Drive Installed | No options | Displays the type of drive installed. | |
Type | • | User | Specifies the drive configuration. |
| • | Auto (default) | User allows capabilities to be changed. |
|
|
| Auto |
|
|
| |
Maximum Capacity | No options | Displays the capacity of the drive. (SATA only) | |
LBA / Large Mode | • | Disabled | This option can be changed only if User is selected as |
| • | Auto (default) | the type. |
Block Mode | • | Disabled | This option can be changed only if User is selected as |
| • | Auto (default) | the type. |
PIO Mode | • | Auto (default) | This option can be changed only if User is selected as |
| • | 0 | the type. |
| • | 1 |
|
| • | 2 |
|
| • | 3 |
|
| • | 4 |
|
|
|
|
|
DMA Mode | • | Auto (default) | This option can be changed only if User is selected as |
| • | SWDMA 0, 1, or 2 | the type. |
| • | MWDMA 0, 1, or 2 | SWDMA = Single Word DMA |
| • | UDMA 0, 1, 2, 3, 4, 5 | MWDMA = Multi Word DMA |
|
|
| UDMA = Ultra DMA |
|
|
|
|
|
|
| continued |
78 | Intel Server Board |