BIOS Settings Dictionary – Alphabetical

 

 

 

 

 

 

Set Supervisor

 

Security

 

Password can be

 

Specifies the Supervisor password.

 

 

 

 

 

 

 

Password

 

 

 

up to seven

 

 

 

 

 

 

 

 

alphanumeric

 

The supervisor password gives unrestricted access to view

 

 

 

 

 

 

characters.

 

and change all Setup options. If only the supervisor

 

 

 

 

 

 

 

 

password is set, pressing <Enter> at the password prompt

 

 

 

 

 

 

 

 

of Setup gives the user restricted access to Setup. If both

 

 

 

 

 

 

 

 

the supervisor and user passwords are set, you must enter

 

 

 

 

 

 

 

 

either the supervisor password or the user password to

 

 

 

 

 

 

 

 

access Setup. Setup options are then available for viewing

 

 

 

 

 

 

 

 

and changing depending on whether the supervisor or user

 

 

 

 

 

 

 

 

password was entered.

 

 

 

 

 

 

 

 

 

 

 

Set User Password

 

Security

 

Password can be

 

Specifies the user password.

 

 

 

 

 

 

up to seven

 

 

 

 

 

 

 

 

alphanumeric

 

 

 

 

 

 

 

 

characters.

 

 

 

 

 

 

 

 

 

 

 

 

 

Set User Password

 

Security

 

Password can be

 

Specifies the User password.

 

 

 

 

 

 

up to seven

 

 

 

 

 

 

 

 

alphanumeric

 

Setting a user password restricts who can boot the

 

 

 

 

 

 

characters.

 

computer. The password prompt is displayed before the

 

 

 

 

 

 

 

 

computer is booted. If only the supervisor

 

 

 

 

 

 

 

 

password is set, the computer boots without asking for a

 

 

 

 

 

 

 

 

password. If both passwords are set, you can enter either

 

 

 

 

 

 

 

 

password to boot the computer.

 

 

 

 

 

 

 

 

 

 

 

Silent Boot

 

Boot

 

• Enabled

 

Disabled displays normal POST messages.

 

 

 

 

 

 

• Disabled

 

 

 

 

 

 

 

 

 

 

Enabled displays OEM logo instead of POST messages.

 

 

 

 

 

 

 

 

 

 

 

SOL/IDER

 

Intel® ME > Intel®

 

• Kerberos only

 

Selects how IDER and SOL operation verify and secure

 

 

Authentication Mode

 

Active

 

• User Name and

 

interfaces on LAN

 

 

 

 

Management

 

Password

 

 

 

 

 

 

Technology

 

 

 

 

 

 

 

 

Configuration >

 

 

 

 

 

 

 

 

SOL/IDER

 

 

 

 

 

 

 

 

Configuration

 

 

 

 

 

 

Subnet Mask

 

Intel® ME > Intel®

 

User defined

 

Enter the address in dot-decimal notation.

 

 

 

 

Active

 

 

 

 

 

 

 

 

Management

 

 

 

 

 

 

 

 

Technology

 

 

 

 

 

 

 

 

Configuration >

 

 

 

 

 

 

 

 

TCP/IP

 

 

 

 

 

 

 

 

Configuration

 

 

 

 

 

 

Subnet Mask

 

Manageability

 

<Enter>

 

Press <Enter> to edit the subnet mask for the client

 

 

 

 

 

 

 

 

system.

 

 

This setting editable

 

 

 

 

 

 

 

 

only if Obtain an IP

 

 

 

 

 

 

 

 

Automatically is set to

 

 

 

 

 

 

 

 

No.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Supervisor Password

 

Security

 

No changeable

 

Reports if there is a Supervisor password set.

 

 

 

 

 

 

options

 

 

 

 

 

 

 

 

 

 

 

 

 

SW Single Processor

 

Main

 

• Enabled

 

Sets the processor mode for dual core processors.

 

 

Mode

 

 

 

• Disabled

 

 

 

 

 

 

 

 

 

 

Disabled: Dual Core processor will run in Dual Core mode.

 

 

This BIOS setting is

 

 

 

 

 

 

 

 

present only on Intel®

 

 

 

 

 

Enabled: Dual Core processor will NOT run in Dual Core

 

 

Desktop Boards that

 

 

 

 

 

mode.

 

 

include support for

 

 

 

 

 

 

 

 

dual core processors

 

 

 

 

 

 

 

 

when a dual core

 

 

 

 

 

 

 

 

processor is installed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

V09 – March 2008

Page 29
Image 29
Intel V09 manual Sol/Ider