BIOS Settings Dictionary – Alphabetical
R
BIOS Setting | Appears on BIOS | Options | Description / Purpose |
| Screen… |
|
|
|
|
|
|
Ratio Actual Value | Maintenance | No changeable | Displays processor’s Bus Ratio. |
|
| options |
|
|
|
|
|
Rear Audio Optical | Advanced > | • Enabled | If enabled, sends digital audio from the external TOSLINK |
Output | Peripheral | • Disabled | to the internal header |
| Configuration |
|
|
|
|
|
|
Rear Fan Speed | Advanced > | No changeable | Displays rear fan speed. |
| Hardware | options |
|
| Monitoring |
|
|
|
|
|
|
Recover to | Manageability | <Enter> | Press <Enter> to display available checkpoints. Select the |
Checkpoint |
|
| checkpoint to restore, and then press F10 to save and exit. |
|
|
| Allows you to reverse any changes made since the creation |
|
|
| of any of the checkpoints currently on the computer. A |
|
|
| Checkpoint is a saved status of the client hard disk. When |
|
|
| the Intel® Platform Administrator Client is enabled, the user |
|
|
| can create a checkpoint to save the current status for future |
|
|
| recovery. |
|
|
|
|
Remote Temp | Advanced > | No changeable | Displays the temperature of the onboard remote thermal |
| Hardware | options | diode. |
| Monitoring |
|
|
|
|
|
|
Removable Device | Boot | Lists all installed | Allows you to set the boot order of removable devices |
Priority |
| removable devices | (floppy drives, USB thumb drives, etc) |
|
|
|
|
Removable Devices | Boot | No changeable | Opens the Removable Devices |
|
| options | specify the boot sequence from the available removable |
|
|
| devices. |
|
|
|
|
Removable Drive | Boot | Lists all installed | Allows you to set the boot order of removable devices |
Order |
| removable devices | (floppy drives, USB thumb drives, etc) - used when Boot |
|
|
| Menu type is set to normal. |
|
|
|
|
Reset Intel® AMT to | Maintenance | No changeable | Resets Intel® AMT to the default factory settings. |
default factory settings |
| options |
|
|
|
|
|
S |
|
|
|
BIOS Setting | Appears on BIOS | Options | Description / Purpose |
| Screen… |
|
|
|
|
|
|
S.M.A.R.T. | Advanced > Drive | • Auto | Enable or Disable support for the hard disk's S.M.A.R.T. |
| Configuration > | • Disable | (Self Monitoring Analysis And Reporting Technology) |
| SATA/PATA | • Enable | capability. S.M.A.R.T. is supported by all current hard disks |
|
|
| and allows the early prediction and warning of impending |
|
|
| hard disk failures. |
|
|
| You should enable it if you want to use |
|
|
| utilities to monitor the hard disk's condition. |
|
|
|
|
SATA AHCI Mode | Advanced > Drive | • Enabled | Enables the SATA controllers in an "Advanced Host |
| Configuration | • Disabled | Controller Interface" mode that improves system |
|
|
| performance if the drives attached support AHCI. |
|
|
| This setting will be auto enabled if the onboard RAID |
|
|
| controller is enabled. NOTE: This changes the device |
|
|
| class of the SATA controllers and can cause driver reload |
|
|
| in the OS. |
|
|
|
|
V09 – March 2008
