Intellinet Network Solutions 529930, I-ISS-020 user manual Package Contents, Hardware Introduction

Package Contents

This package has:

1.One Internet Sharing Station

2.One power adapter

3.Wall Mounting kit

4.This user’s guide

Hardware Introduction

The components of the unit are shown as the following figure:

Front Panel

LED Status Table

PWR		ON: DC power is on
		OFF: No DC power
	FDX	ON: Indicates communication on your LAN is operating at full-duplex mode.
		OFF: Indicates transmission mode is half-duplex.
LAN	LNK	ON: Ethernet interface is being connected.
		OFF: Ethernet interface not connected
	ACT	Blinking: Indicates traffic passing through the Ethernet port.
		OFF: No traffic
	ERR	ON: Error condition
		OFF: Normal condition
	UTL	(ON=1; OFF=0) Enumerate from left to right.
		When the WAN-1 port is connected to modem, and it is on idle state, the LEDs are used to
		indicate baudrate. When connection is established, the LEDs are used to indicate utilization.
WAN-1		“000”- Port disconnected
		“100”- Baudrate=9.6K; or Utilization=20%
		“010”- Baudrate=19.2K
		“110”- Baudrate=38.4K; or Utilization=60%
		“001”- Baudrate=57.6K
		“101”- Baudrate=115.2K
		“011”- Baudrate=230.4K
		“111”- Baudrate= reserved; or Utilization=100%
	ERR	ON: Error condition
		OFF: Normal condition
	UTL	(ON=1; OFF=0) Enumerate from left to right.
		When the WAN-2 port is connected to modem, and it is on idle state, the LEDs are used to
		indicate baudrate. When connection is established, the LEDs are used to indicate utilization.
WAN-2		“000”- Port disconnected
		“100”- Baudrate=9.6K; or Utilization=20%
		“010”- Baudrate=19.2K
		“110”- Baudrate=38.4K; or Utilization=60%
		“001”- Baudrate=57.6K
		“101”- Baudrate=115.2K
		“011”- Baudrate=230.4K
		“111”- Baudrate= reserved; or Utilization=100%

2