15
Specifications Standards and Protocols
IEEE 802.3 10BASE-T and 10BASE2
TCP/IP, PPP, CHAP/PAP/MS-CHAP, DHCP
Operational Characteristics
LAN port: 10BASE2/10BASE-T auto sensing
WAN speed: 230.4Kbps max. DTE speed
Power Characteristics
External Power Adapter:
Input Voltage: 100VAC, 60Hz / 120VAC, 60Hz / 230VAC, 50Hz / 240VAC, 50Hz
Output Voltage: 9 VDC, 1 A
Physical Characteristics
Number of ports: 1 x 10BASE-T/10BASE2, 2 x RS-232
Panel indicators: PWR, Link, Activity, Full Duplex, Error, Utilization/Baudrate
Weight: 0.28 kg
Dimensions: 135 x 104 x 35 mm (L x W x H)
Temperature:
Operating: 0℃ to 40℃;
Storage: –20℃ to 70℃
Humidity: 5% to 95% (non-condensing)
Approvals:
EMI: FCC Class B,VCCI Class B, CISPR 22 Class B
Safety: TÜV/GS, UL, cUL
EMI Information
FCC Class B (For USA Only)
FCC ID: NUKISCCM020
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
Warning! This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from the one
which the receiver is connected to
• Consult the dealer or an experienced radio/TV technician for help
You are cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
You may use unshielded twisted-pair (UTP) for RJ-45 connections.
VCCI Class B (For Japan Only)