SECTION
Inspect/Adjust Weekly
❑Ensure that the wheel locks prevent the wheelchair from moving when engaged.
❑Inspect tires for flat spots and wear.
❑Check pneumatic tires for proper inflation.
❑If equipped, check that quick‐release axles lock properly. Lubricate if necessary.
❑Inspect rear wheels for cracked, bent or broken spokes.
❑Ensure all spokes are uniformly tight.
❑Inspect axle assembly for proper tension by spinning caster. Caster should come to a gradual stop.
❑Inspect front caster for cracked, bent or broken spokes.
❑Ensure that casters are free of debris.
Inspect/Adjust Monthly
❑Ensure that the wheelchair rolls straight (no excessive drag or pull to one side).
❑Check that the wheel locks do not interfere with tires when rolling.
❑Check that the wheel lock pivot points are free of wear and looseness.
❑Inspect seat and back for loose or broken hardware.
❑Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑Inspect back cane hand grips for wear/looseness/deterioration.
❑Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a stop.
❑Ensure wheel bearings are clean and free of moisture.
❑Check headtube locknuts for tightness.
Inspect/Adjust Periodically
❑Inspect frame and crossbraces for loose or missing hardware.
❑Inspect for bent frame or crossbraces.
❑Check that wheel locks are easy to engage.
❑Inspect seat and backs for rips and sagging.
❑Check that there is no excessive side movement or binding in the rear wheels when lifted and spun.
❑Inspect handrims for signs of rough edges or peeling.
❑Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a stop.
❑Ensure wheel bearings are clean and free of moisture.
❑Inspect casters for cracks and wear.
❑Ensure that casters are free of debris.
❑Clean upholstery and armrests.
❑Check that all labels are present and legible. Replace if necessary.
Maintenance
Maintenance Safety Precautions
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or damage may result.
Tracer® EX2 | 16 | Part No. 1110546 |
