SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
❑Check center mount front riggings for worn/frayed belts and/or loose fasteners. If found, replace these items.
❑Check that all labels are present and legible. Replace if necessary.
❑Check that cables are routed and secured properly to ensure that cables DO NOT become entangled and damaged during normal operation of seating system.
Inspect/Adjust Weekly
CAUTION
As with any vehicle, the wheels and tires should be checked periodically for cracks and wear, and should be replaced.
❑Ensure wheels/casters have proper tension when wheels/casters are spun (when free‐ wheeling). Wheels/casters should come to a gradual stop.
❑Ensure that casters are free of debris.
❑Ensure all caster/wheel/fork/headtube fasteners are secure and not damaged/missing.
❑Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.
❑Inspect tires for flat spots and wear.
❑Ensure wheel locks DO NOT interfere with tires when rolling.
❑Ensure wheel lock pivot point are free of wear and looseness.
❑Ensure wheel locks are easy to engage.
❑Inspect all fasteners.
❑Inspect TRRO/TRBKTS fasteners and hardware.
❑Check that cables are routed and secured properly to ensure that cables DO NOT become entangled and damaged during normal operation of seating system.
Inspect/Adjust Monthly
❑Ensure axle nut and wheel mounting nuts are secure on drive wheels.
❑Clean upholstery and armrests.
❑Clean dirt and lint from axles.
❑Clean dirt and lint from bearings.
❑Ensure that casters are free of debris.
❑Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
Part No 1154294 | 27 | TDX® SI, TDX |
