SECTION 8—FOOTBOARD ASSEMBLY

 

 

Footboard Support

 

 

Washers

 

 

Socket Head

 

 

Screw

Washer

 

 

Spacer

 

Footboard

Locknut

Assembly

 

FIGURE 8.1 Removing/Installing the Footboard

Adjusting the Footboard Angle

NOTE: For this procedure, refer to FIGURE 8.2.

1.Loosen the jam nut and set screw located underneath on the rear of the footplate.

2.Adjust the mounting screw in or out to obtain the desired footboard angle.

3.Thread the jam nut inward until it is flush with the footboard bracket.

4.Securely tighten the jam nut and washer to secure the mounting screw in place.

Set Screw

Jam Nut

Footboard

FIGURE 8.2 Adjusting the Footboard Angle

Part No 1154294

49

TDX® SI, TDX SI-HD

Page 49
Image 49
Invacare TDX SI manual Adjusting the Footboard Angle, Removing/Installing the Footboard