Invacare TDX SI manual Repositioning Joystick, Van Seats

SECTION 5—WHEELCHAIR OPERATION

Repositioning Joystick

Van Seats

NOTE: For this procedure, refer to FIGURE 5.9.

NOTE: Take note of position and orientation of mounting hardware for reinstalling the joystick assembly.

1.Turn the adjustment lock lever to release the joystick mounting tube from the mounting bracket.

2.Remove the joystick mounting tube from the wheelchair.

3.Remove the three hex mounting screws, bushings and locknuts that secure the mounting bracket to the three mounting holes on the armrest plate.

NOTE: The mounting bracket is mounted to the inside of the armrest plate.

4.Reposition the mounting bracket on the opposite armrest plate.

5.Using the three hex mounting screws, bushings and locknuts secure the mounting bracket to the three mounting holes of the armrest plate.

6.If necessary, perform the following to reposition the adjustment lock:

A.Slide the adjustment lock from the mounting bracket.

B.Rotate adjustment lock 180° and slide adjustment lock over the opposite end of the mounting bracket.

7.Slide joystick mounting tube through the mounting bracket to the desired position and secure adjustment lock to tube by turning lever on adjustment lock.

Mounting Bracket	Hex Mounting Screws
Armrest Plate	Adjustment Lock Lever
	Joystick Mounting Tube
Bushings	NOTE: Joystick
	not shown.
	Locknuts

FIGURE 5.9 Repositioning Joystick - Van Seats

Part No 1154294 43 TDX® SI, TDX SI-HD