Care & Handling
Your IOGEAR® BOSS™ is a high performance Network Server Appliance. The head that reads the information on the installed Hard Drive is a fragile piece of technology. Therefore, care must be taken not to bump the BOSS™ while it is operating. Care must also be taken not to bump the BOSS™ excessively when the drive is turned off.
To insure maximum reliability of the BOSS™, please follow the guidelines listed below:
•DO NOT block the air circulation around the vents of the BOSS™.
•DO NOT move or bump the BOSS™ while it is operating.
•Keep all cables out of aisles and off desktops where they can be hooked and pulled.
•Keep the BOSS™ firmly secured in the shipping container when shipping the drive.
•Keep the environment around the drive clean and free of excessive dust and chemicals.
•Use a damp cloth to clean the BOSS™. NEVER put cleansers directly on the BOSS™ case.
•Use surge protectors with the BOSS™.
•DO NOT expose the BOSS™ to extreme temperatures.
•DO NOT expose the BOSS™ to direct sun light for extended periods of time.
•DO NOT get the BOSS™ wet.
•DO NOT place the BOSS™ in an area with an excessive amount of dirt.
70
