Iomega 9000 Series Connecting the Keyboard, Mouse, and Peripheral Devices

To connect a monitor to the computer:

1.Set up your monitor according to the instructions that accompany it.

2.Connect the monitor interface cable to the video port on the back of the computer (Figure 1), or to the add-in video connector if you have installed a video adapter.

3.To use a multifrequency monitor in standard VGA mode, set the monitor to analog mode.

4.Plug the monitor power cord into a grounded outlet.

Figure 1. Video Port Location

Connecting the Keyboard, Mouse, and Peripheral Devices

If a plastic cap covers the end of the keyboard cable, remove it. Plug the keyboard and mouse into their connectors at the back of the computer. Be sure that the arrows on the cable plugs point to the right as you face the rear of the system.

6 Advantage! 9000 Series User’s Manual