2.If you are installing a drive that requires an
3.Remove a face plate from the front panel and the corresponding face plate from the chassis (Figure 14):
a.From the front of the front panel, press on the sides of the face plate until it comes out of the panel.
b.Select the face plate on the chassis that corresponds to the face plate you removed from the front panel. Insert a screwdriver into the slot in the center of the face plate, and twist it until the face plate pops off the chassis.
Zip drive not shown in this illustration.
Figure 14. Accessing the Front Drive Bay
4.Attach one guide rail to each side of the drive:
a.A metal grounding clip should be attached to each guide rail on the side that faces the drive. If the grounding clip has not been attached, slide the grounding clip over the round mounting hole. The
28 Advantage! 9000 Series User’s Manual