clip fits into indentations at the top and bottom of the rail and snaps into place (Figure 15).
Figure 15. Installing Guide Rails
b.Position each guide rail so that the end with the tab faces the front of the drive, and the grounding clip is next to the drive. Align the mounting holes on the drive with the holes on the guide rail.
c.Attach the guide rails to each side of the drive by installing four mounting screws (Figure 15).
5.Slide the drive into the bay, until the tabs on the guide rails snap into the slots on the drive bay (Figure 16). To remove a drive, press the tabs on the guide rails until the drive slides freely.
Upgrading Your Computer 29