Main Menu

System Date: Use two-digit numbers to indicate month, day, and year.

System Time: Use two-digit numbers to indicate hour, minute, and second. Use a 24-hour clock.

Floppy Options

Press <Enter> to view or change the configuration of the floppy drives.

Floppy A: Indicates whether floppy A is installed. This field is for reference only.

Floppy B: Indicates whether floppy B is installed. This field is for reference only.

Floppy A Type: This field specifies the type of the first floppy drive, if installed. To select the floppy A type, highlight the field and press <Enter>. Scroll up or down through the selections in the dialog box using the direction arrows. Press <Enter> to make your selection. The options are None, 360 KB (5.25-inch), 1.2 MB (5.25- inch), 720 KB (3.5-inch), 1.44/1.25 MB (3.5-inch), or Disabled.

Floppy B Type: This field specifies the type of the second floppy drive, if installed. To select the floppy B type, highlight the field and press <Enter>. Scroll up or down through the selections in the dialog box using the direction arrows. Press <Enter> to make your selection. The options are the same as those for Floppy A.

Floppy Access: Allows you to set the floppy drives to either read/write or read only. The default is read/write.

Primary IDE Master, Primary IDE Slave, Secondary IDE Master, and Secondary IDE Slave:

These fields report if an IDE device is connected to the system. When selected, each of these fields brings up an identical secondary menu for configuring the IDE device, as described below.

Configuring Your Computer 45