Getting started
About power supply
Charging by using USB cable
Connect the USB cable to the player and the PC. The iFP battery will begin charging.
Note ∀ The player will charge even if it is turned off. ∀ A charging indicator light will illuminate while the player is charging. The light will turn off
when charging is complete.
If the battery is worn out, “Low Battery” is displayed on the LCD.
Charging by using AC adapter
Connect the AC Power Adapter supplied with the player to the USB connector of the player. The AC operating voltage of this player is 100~240V, 50/60Hz.
Note ∀ The charging time : Approx. 2.5~3 hours (At full discharge)
About power supply
Battery detach/attach
∀To detach : Press the tab to release the battery and slide it out of the player.
∀To attach : Slide the battery onto the player until it locks into place.
Note ∀ Charge and store the battery at room temperature.
It may not charge properly in hot or cold temperature environments.
∀Do to attempt to disassemble the battery. Do not expose the battery to open flame. These activities could cause the battery to explode resulting in serious injury.
∀Do not contact the connectors of the battery to metal objects, or an electrical short may occur.
Getting started
|
|
| ||
|
|
