ZyAIR B-4000 Hot Spot Gateway

Figure 20-9 System Restart

Step 4. After the ZyAIR finishes restarting, access the web configurator again. Check the firmware version number in the System screen.

When the ZyAIR restarts, all connections terminate. Subscribers need to log in

again.

20.3.2 Manual Firmware Upgrade via TFTP Server

Follow the steps below to upload the firmware using the web configurator.

Step 1. Download the latest firmware from www.zyxel.com and store it in a TFTP server. Unzip the file if it is zipped.

Step 2. Run a TFTP server program and specify the location of the firmware file and the communication mode. Refer to the documentation that comes with your TFTP server program for instructions.

Step 3. Access the web configurator. Refer to the section on accessing the web configurator for instructions.

Step 4. Click SYSTEM TOOLS, FIRMWARE and then Manual Firmware Upgrade to display the screen as shown.

20-8

Configuration, Firmware and Accounting Log Maintenance