ZyAIR B-4000 Hot Spot Gateway

 

 

The following table describes the fields in this screen.

 

 

 

Table 4-2 SERVER

 

 

 

 

 

 

LABEL

DESCRIPTION

 

 

 

 

 

 

Web Server

 

 

 

 

 

 

 

Web Server Port

Specify the port number of the embedded web server on the ZyAIR for accessing

 

 

 

the web configurator. The default port number is 80. Changing the port number

 

 

 

helps protect the ZyAIR’s web configurator from hacker attacks.

 

 

 

Enter a number between 8010 and 8060 to access the web configurator behind a

 

 

 

NAT-enabled network.

 

 

 

If you enter a number between 8000 and 8060, you need to append the port

 

 

 

number to the WAN or LAN port IP address to access the web configurator. For

 

 

 

example, if you enter “8010” as the web server port number, then you must enter

 

 

 

“http://www.192.168.1.1:8010” where 192.168.1.1 is the WAN or LAN port IP

 

 

 

address.

 

 

 

 

 

 

SSL Security

Secure Socket Layer (SSL) security allows you to create secure connections

 

 

 

between the ZyAIR and the management computer(s). Refer to the SSL (Secure

 

 

 

Socket Layer) Security chapter for more information.

 

 

 

Select this check box to activate SSL security.

 

 

 

 

 

 

Administrator Idle-

Type how many minutes a management session can be left idle before the session

 

 

Timeout

times out. The default is 5 minutes. After it times out you have to log in with your

 

 

 

password again. Very long idle timeouts may have security risks. A value of "0"

 

 

 

means a management session never times out, no matter how long it has been left

 

 

 

idle (not recommended).

 

 

 

 

 

DHCP Server

Select the DHCP mode on the LAN.

DHCP Disable

Select this option to disable DHCP server on the LAN.

 

 

DHCP Relay

Use this if you have a DHCP server (either a computer or another router) and you

 

want that DHCP server to also assign network information (IP address, DNS

 

information etc.) to the devices that connect to the ZyAIR. Select this option to set

 

the ZyAIR to forward network configuration requests to a DHCP server.

 

Then configure the DHCP Server IP Address field.

 

 

DHCP Server IP

If you select DHCP Relay, enter the IP address of a DHCP server (on the WAN).

Address

 

WAN, LAN and Server Setup

4-9