ZyAIR B-4000 Hot Spot Gateway

 

 

 

Table 4-1 WAN/LAN

 

 

 

 

 

 

LABEL

DESCRIPTION

 

 

 

 

 

 

Connect on Demand

Select this option when you don’t want the connection up all the time and specify

 

 

 

an idle timeout in the Max Idle Time field. This is the default setting with an idle

 

 

 

timeout of 10 minutes.

 

 

Keep Alive

Select this option when you want the Internet connection up all the time and

 

 

 

specify a redial period in the Redial Period field. When disconnected, the ZyAIR

 

 

 

will attempt to bring up the connection after the redial period.

 

 

 

 

 

 

PPTP

Select this option to activate PPTP support. Refer to Section 4.7 for more

 

 

 

information.

 

 

My IP Address

Enter the IP address assigned to you.

 

 

 

 

 

 

My Subnet Mask

Enter the subnet mask assigned to you.

 

 

 

 

 

 

Gateway IP address

Enter the IP address of the gateway device.

 

 

 

 

 

 

PPTP Server IP

Enter the IP address of your ISP’s PPTP server.

 

 

Address

 

 

 

 

 

 

 

Username

Enter the user name exactly as your ISP assigned. If assigned a name in the

 

 

 

form user@domain where domain identifies a service name, then enter both

 

 

 

components exactly as given.

 

 

 

 

 

 

Password

Enter the password associated with the user name above.

 

 

 

 

 

 

PPP MTU Setting

Enter the MTU (Maximum Transfer Unit) size.

 

 

 

 

 

 

TCP MSS Setting

Enter the MSS (Maximum Segment Size) size.

 

 

 

 

 

 

Connection ID/Name

Enter your identification name of the PPTP server assigned to you by the ISP.

 

 

 

 

 

 

Connect on Demand

Select this option when you don’t want the connection up all the time and specify

 

 

 

an idle timeout in the Max Idle Time field. This is the default setting with an idle

 

 

 

timeout of 10 minutes.

 

 

Keep Alive

Select this option when you want the Internet connection up all the time and

 

 

 

specify a redial period in the Redial Period field. When disconnected, the ZyAIR

 

 

 

will attempt to bring up the connection after the redial period.

 

 

 

 

 

 

Apply

Click Apply to save the changes.

 

 

 

 

 

4.9Server Configuration

Use the SERVER screen to set the embedded web server, the LAN DHCP server and specify the e-mail server for e-mail redirection on the ZyAIR.

WAN, LAN and Server Setup

4-7