ZyAIR B-4000 Hot Spot Gateway

The following table describes the labels in this screen.

 

Table 4-1 WAN/LAN

 

 

LABEL

DESCRIPTION

 

 

LAN

 

 

 

IP Address

Enter the LAN IP address of the ZyAIR in dotted decimal notation. The default is

 

192.168.1.1.

Subnet Mask

Enter the LAN subnet mask in dotted decimal notation. The default is

 

255.255.255.0.

WAN MAC Address

Select Default to use the factory assigned MAC address.

 

If your ISP requires MAC address authentication, select Change to and enter the

 

MAC address of a computer on the LAN in the fields provided.

WAN Port Mode

 

 

 

DHCP Client

Select this option to set the ZyAIR to act as a DHCP client on the WAN. The

 

ZyAIR obtains TCP/IP information (IP address, DNS server information, etc.)

 

from a DHCP server. This is the default setting.

 

 

Static IP

Select this option to set the ZyAIR to use a static (or fixed) IP address.

 

 

IP Address

Enter the static IP address in dotted decimal notation.

 

 

Subnet Mask

Enter the subnet mask in dotted decimal notation.

 

 

Gateway IP address

Enter the IP address of the default gateway device.

 

 

Primary/Secondary

Enter the IP addresses of the primary and/or secondary DNS servers.

DNS Server

 

 

 

PPPoE

Select this option to activate PPPoE support. Refer to Section 4.6 for more

 

information.

Username

Enter the user name exactly as your ISP assigned. If assigned a name in the

 

form user@domain where domain identifies a service name, then enter both

 

components exactly as given.

 

 

Password

Enter the password associated with the user name above.

 

 

PPP MTU Setting

Enter the MTU (Maximum Transfer Unit) size.

 

 

TCP MSS Setting

Enter the MSS (Maximum Segment Size) size.

 

 

Service Name

Enter the name of your PPPoE service.

 

 

4-6

WAN, LAN and Server Setup