ZyAIR B-4000 Hot Spot Gateway

 

 

 

Table 3-1 SYSTEM

 

 

 

 

 

 

LABEL

DESCRIPTION

 

 

 

 

 

 

Secure administrator

Select Any to use any computer to access the web configurator on the ZyAIR.

 

 

IP addresses

Select Specify and then enter the IP address(es) or ranges of IP addresses of the

 

 

 

 

 

 

computer(s) that are allowed to log in to configure the ZyAIR. The addresses can

 

 

 

be on the LAN or the WAN.

 

 

 

 

 

 

Multicast Pass

Select Enable to allow multicast traffic to pass through the ZyAIR. This may affect

 

 

Through

your network performance.

 

 

 

Select Disable to prevent any multicast traffic from passing through the ZyAIR.

 

 

 

This is the default setting.

 

 

 

 

 

 

Allow remote user to

This feature affects the security of the ZyAIR’s WAN port. Ping (Packet INternet

 

 

ping the device

Groper) is a protocol that sends out ICMP echo requests to test whether or not a

 

 

 

remote host is reachable. Select Enable to have the ZyAIR respond to incoming

 

 

 

Ping requests from the WAN. This is less secure since someone on the Internet

 

 

 

can see that the ZyAIR is there by pinging it.

 

 

 

Select Disable to have the ZyAIR not respond to incoming Ping requests from the

 

 

 

WAN. This is more secure since someone on the Internet cannot see that the

 

 

 

ZyAIR is there by pinging it.

 

 

 

 

 

 

SSL Certificate

Secure Socket Layer (SSL) security allows you to create secure connections

 

 

 

between the ZyAIR and the management or subscriber computer(s).

 

 

 

Select Default to use the default system-generated SSL certificate.

 

 

 

Select Customer Certificate to use a certificate obtained from a certificate

 

 

 

authority.

 

 

 

Refer to the SSL (Secure Socket Layer) Security chapter for more information.

 

 

 

 

 

 

Apply

Click Apply to save the changes.

 

 

 

 

 

General System Setup

3-5