Jabra user manual Pairing Your Jabra SP200 with Your Mobile Phone

PAIRING YOUR JABRA SP200 WITH

YOUR MOBILE PHONE

The Speakerphone can be connected to a mobile phone using a procedure called ‘pairing’.. By following a few simple steps, a phone can be paired with the speakerphone in a matter of minutes..

1 Put the speakerphone in pairing mode

-When you turn on your Jabra SP200 for the first time, the speakerphone will automatically start up in pairing mode – i..e.. it can be detected by your phone.. When the speakerphone is in pairing mode the blue LED will flash rapidly..

2 Set your Bluetooth phone to ‘search’ for the Jabra SP200

-Follow your phone’s instruction guide.. First make sure that Bluetooth is activated on your mobile phone.. Then set your phone to search for devices.. This usually involves going to a ‘setup,’‘connect’ or ‘Bluetooth’ menu on your phone and select- ing the option to ‘search’ or ‘add’ a Bluetooth device..*

3 Your phone will find the Jabra SP200

-Your phone will find the speakerphone under the name “Jabra SP200”.. Your phone then asks if you want to pair with the Jabra SP200.. Accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm with the passkey or PIN = 0000 (4 zeros).. Your phone will confirm when pairing is complete..

english

CONNECTIVITY

MobilSurf

BLUETOOTH

Infrared port Wap options Synchronization Networks

SELECT

DEVICES FOUND

Jabra SP200

SELECT

Jabra SP200

Passkey:

****

OK

HANDSFREE

Jabra SP200 added.

The handsfree is now ready for use

SELECT

Manual pairing mode

If you wish to use the speakerphone with a different phone, or if the pairing process was interrupted, you can manually set the speakerphone to pairing mode..

Turn the speakerphone on.. Press and hold the answer/end button for approximately 5 seconds until the blue LED light stars blinking rapidly.. Then repeat steps 2.. and 3.. in the above pairing guide..

* Phone dependent Jabra SP200 6