JBL DVD600II, SCS135P E r a t i n g t h e D C R 6 0 0 II R e c e i v e r, Surround Mode Chart

O p e r a t i n g t h e D C R 6 0 0 II R e c e i v e r

Surround Mode Chart

MODE FEATURES DELAY TIME RANGE

Dolby Digital	Available only with digital input sources encoded with Dolby Digital data. It provides
	up to five separate main audio channels and a special dedicated Low-Frequency Effects
	channel.

Center: 0 ms – 5 ms Initial Setting = 0 ms Surround: 0 ms – 15 ms Initial Setting = 0 ms

DTS	Available only with digital input sources encoded with DTS data. Available on special		Delay time not adjustable
	DVD, LD and audio-only compact discs, DTS provides up to five separate main audio
	channels and a special dedicated low-frequency channel.
Dolby Pro Logic II	Dolby Pro Logic II is the latest version of Dolby Laboratories’ benchmark surround technology		15 ms – 30 ms
Movie, Music and	that decodes full-range, discrete left, center, right, surround right and surround left channels		Initial Setting = 15 ms
Emulation	from either matrix surround-encoded programs or conventional stereo sources.
	The Dolby Pro Logic II Movie mode is optimized for movie soundtracks, while the Pro Logic II Music
	mode should be used with musical selections. The Pro Logic II Emulation mode re-creates original
	Pro Logic processing for those who prefer that presentation.
Logic 7 C	Logic 7 is an advanced mode that extracts the maximum surround information from either		Delay time not adjustable
Logic 7 M	surround-encoded programs or conventional stereo material. The Logic 7 C, or Cinema, mode
	should be used with any source that contains Dolby Surround or similar matrix encoding.
	Logic 7 C delivers increased center-channel intelligibility, and more accurate placement of sounds
	with fades and pans that are much smoother and more realistic than with other decoding
	techniques. The Logic 7 M, or Music, mode should be used with analog or PCM stereo sources.
	Logic 7 M enhances the listening experience by presenting a wider front soundstage and greater
	rear ambience. Both Logic 7 modes also direct low-frequency information to the subwoofer
	(if installed and configured) to deliver maximum bass impact.
Dolby 3 Stereo	Uses the information contained in a surround-encoded or two-channel stereo program to		No surround channels
	create center-channel information. In addition, the information that is normally sent to the
	rear-channel surround speakers is carefully mixed in with the front left and front right
	channels for increased realism. Use this mode when you have a center channel speaker
	but no surround speakers.
Theater	This mode uses matrix surround decoding to simulate a standard movie or		Delay time not adjustable
	stage theater.
Hall 1, 2	The Hall modes offer a matrix surround choice that simulates a small (Hall 1) or medium-sized		Delay time not adjustable
	(Hall 2) chamber hall.
5-Channel Stereo	This mode takes advantage of multiple	speakers to place a stereo signal at both the front and	No delay is available for
	back of a room. Ideal for playing music	in situations such as a party, it places the same signal	this mode
	at the front left and surround left, and	front right and surround right speakers. The center
	channel is fed a summed mono mix of the in-phase material of the left and right channels.
Surround	This mode turns off all surround processing and presents the pure left- and right-		No surround channels
Off (Stereo)	channel presentation of two-channel stereo programs.

52