JBL DCR600II, SCS135P Or Video CD other types will not play, Use, On your television, Normal play

Troubleshooting

Disc does not play		• Disc loaded improperly	• Load disc label-side up.
		• Incorrect disc type	• Check to see that disc is CD, CD-R, CD-RW, DVD-Movie, MP3
			or Video CD; other types will not play.
		• Invalid Region Code	• Use Region 1 disc only.
		• Rating is above parental preset	• Enter password to override or change rating settings.
		• Wrong source for CD was selected	• If you are playing a CD in the DVD600II,
			you must select the DVD source on the
				DCR600II,
			not the CD source.
No picture		• Intermittent connections	• Check all video connections.
		• Wrong input	• Check input selection of TV or DCR600II.
		• Different types of video connections	• You may not mix video connection types. If you use S-Video
		in use	connections from the DVD600IIto the DCR600II, you must
			also use the S-Video input on your television. If you use the
			composite video connections from the DVD600II to the
			DCR600II, you must also use the composite video input
			on your television.
Picture is distorted or jumps during		• MPEG-2 decoding	• It is a normal artifact of DVD playback for pictures
Fast Forward or Reverse Play			to jump or show some distortion during rapid play.
Picture jumps or freezes during		• Unit may be overheating	• Due to the nature of this product category, DVD players,
normal play			while being operated at elevated temperatures, may exhibit
			certain anomalies such as picture freeze-ups. If this occurs,
			the DVD600II needs to be “reset” by powering it down
			and up again, using its master On/Off switch. Should this
			occur with your DVD600II, first check your discs for any
			damage, scratches, and fingerprints. If discs are OK, then
			ventilation around the DVD600II needs to be increased
			to ensure proper operation.
Some remote buttons	do not operate	• Function not available for this disc	• Some discs do not include all DVD features.
during DVD play
The menu is in a foreign	language	• Incorrect menu language	• Change menu language selection.
“ ” symbol appears		• Requested function not available at	• Certain functions may be disabled during passages
		this time	of a disc.
Picture is displayed in	the	• Incorrect match of aspect ratio settings	• Change Aspect Ratio settings.
wrong aspect ratio		to disc
Disc will not copy to VCR		• Macrovision protection	• Most DVDs are encoded with Macrovision
			to prevent copying to VCR.

68