Troubleshooting Procedures
!WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power and gas to oven before servicing, unless testing requires power and/or gas.
Problem | Possible Cause | |
| Failed oven lamp | |
| Failed wiring | |
Oven light does not operate. | Failed light socket | |
Failed light plunger/switch | ||
|
Programming error ......................................
Oven is
Oven is still hot ............................................
Oven door will not unlock
Normal .........................................................
Oven smokes/odor first few
times of usage
Failure Codes | Electronically Controlled |
|
Correction
•Check lamp and replace is necessary.
•Check for broken, loose or dirty connections.
•Check light socket for continuity.
•Check plunger/switch for continuity. Check wiring diagram for application.
•Shut off power to oven for five minutes by switching off circuit breaker. Reset circuit breaker and try oven again.
•Allow cycle to complete.
•Door will not unlock until unit has cooled to safe temperature. Do not force door open, this will void warranty. Blow cool air on door latch area to quicken process.
•Minor smoking and/or odor is normal the first few times of oven usage.
•Ventilate area well and perform
•See Testing Procedures for diagnostic checks.
©2004 Maytag Services | 16023417 | 15 |