FAULT
CODESPROBLEMS
POWER TO ELEMENT RELAY ENERGIZED
F1 DURING TIME OF DAY DISPLAY.
Over temperature sensed; over 620
F2 sensed by control in time of day mode, bake mode, or over 950 sensed in clean
mode.
F3 Cooling fan on with no oven function selected,
F4 Shorted oven sensor
F5 Power element relays disabled in cook mode.
F7 Shorted key sensed for 32 seconds
F8 Shorted meat probe alarm,
F9 Door lock safety circuit on power relay board sensed.
FF Invalid temp. Reading on PRB.
F- Communication error between boards,
FC Communication error between boards.
DOUBLE OVEN ONLY
IF2 I Second oven error sensed,
COMPONENTS TO CHECK
J2 harness shorted. If checks
ok, change (PRB) power relay board. Note: For double oven only, change second oven board.
Ohm sensor. If checks ok, change power relay board.
"See chart for sensor value."
Ohm sensor, wire harness to sensor.
Ohm sensor, wire harness to sensor,
1)Intermittent sensor or wire harness connection.
2)Intermittent contact on PRB.
1) Membrane shorted
2) Display Board
1)Probe jack or harness to
probe jack.
2)Probe sensing temp. Above 250 F. "See chart."
PRB
Check sensor and harness, PRB.
J2 harness, ohm wires end to end. Harness ok, replace display board.
J2 harness, ok, replace PRB.
1)Check sensor and harness.
2)Replace second oven
board.
16009721 | COMPONENT DESCRIPTION | |
| 01999 Maytag Appliances Sales Company |
|