Jenn-Air JMW3430 manual Parts And Features, Electrical Requirements, Grounding Instructions

Electrical Requirements

Observe all governing codes and ordinances. The microwave oven is connected to both 120-volt sides of the 208/240-volt circuit required for electrical connections. If the incoming voltage to the microwave oven is less than 120 volts, cooking times may be longer. Have a qualified electrician check your electrical system.

This device complies with Part 18 of the FCC Rules.

GROUNDING INSTRUCTIONS

For a permanently connected microwave oven:

The microwave oven must be connected to a grounded, metallic, permanent wiring system, or an equipment grounding conductor should be run with the circuit conductors and connected to the equipment grounding terminal or lead on the microwave oven.

SAVE THESE INSTRUCTIONS

PARTS AND FEATURES

This manual covers different models. The oven you have purchased may have some or all of the items listed. The locations and appearances of the features shown here may not match those of your model.

J

A

B

C

D, E

K

F

G

H

I

A. Electronic oven control

B. Model and serial number plate (on center vent under control panel. NOTE: On single microwave oven models, on the left side trim.)

C. Convection element and fan (hidden behind back panel)

D.Light

E.Broil element

F. Turntable	Parts and Features not shown
G. Metal shielded window	Convection grid
H. Lower oven (on combination models. See	Grilling grid
separate Use and Care Guide.)	Crisper pan and handle
I. Bottom vent
J. Door switch
K. Dual microwave emission

5