Style 2—Copper Line Connection

Connect to Refrigerator

 

NOTE: If there is a water supply line that meets the specifications

 

in “Water Supply Requirements,” proceed to “Connecting to

Parts Supplied:

 

Refrigerator.” If not, use the following instructions to connect to

 

the household cold water supply.

■ ¹⁄₄" to ¹⁄₄" (6.35 mm to 6.35 mm) male-to-male coupling

1. Unplug refrigerator or disconnect power.

 

 

2. Turn OFF main water supply. Turn ON nearest faucet long

 

 

 

enough to clear line of water.

 

 

3.

Locate a ½" to 1¹⁄₄" (1.25 cm to 3.18 cm) vertical cold water

6"

6"

 

pipe near the refrigerator.

 

(15.2 cm)

(15.2 cm)

 

IMPORTANT:

 

 

 

■ Make sure it is a cold water pipe.

 

 

 

■ Horizontal pipe will work, but drill on the top side of the

 

 

 

pipe, not the bottom. This will help keep water away from

 

 

 

the drill and keep normal sediment from collecting in the

 

 

 

valve.

 

 

4. Determine the length of copper tubing you need. Measure

 

1"

 

from the connection on the refrigerator to the water pipe. Add

7"

(2.54 cm)

 

7 ft (2.1 m) to allow for cleaning. Use ¹⁄₄" (6.35 mm) O.D.

 

 

(17.78 cm)

 

 

(outside diameter) copper tubing. Be sure both ends of

 

 

 

copper tubing are cut square.

 

 

5. Using a cordless drill, drill a ¹⁄₄" (6.35 mm) hole in the cold

 

 

 

water pipe you have selected.

 

 

 

A

G

B

 

 

C

F E

D

A. Cold water pipe

E. Compression sleeve

B. Pipe clamp

F. Shutoff valve

C. Copper tubing

G. Packing nut

D. Compression nut

 

6.Fasten the shutoff valve to the cold water pipe with the pipe clamp. Be sure the outlet end is solidly in the ¹⁄₄" (6.35 mm) drilled hole in the water pipe and that the washer is under the pipe clamp. Tighten the packing nut. Tighten the pipe clamp screws slowly and evenly so washer makes a watertight seal. Do not overtighten.

IMPORTANT: Before attaching the tubing to shutoff valve, flush the main water supply line to remove particles and air in the water line. Allow enough flow so that water becomes clear. Flushing the water line may help avoid filters and/or water valves from becoming clogged.

NOTE: The flexible, codes approved water supply line should connect to the supply valve through the floor.

1.Unplug the refrigerator or disconnect power.

2.Connect the 7 ft (2.13 m) flexible codes approved water tube to the water supply valve.

3.Flush the main water supply line to remove particles and air in the water line. Allow enough flow so that water becomes clear.

4.Tape the 7 ft (2.13 m) flexible codes approved water supply line to the floor, 7" (17.78 cm) from the left side of the refrigerator. Tape along the length of the tubing, which will allow it to pass beneath the refrigerator without interference.

NOTE: Allow a minimum of 26" (66.04 cm) of flexible codes approved water supply line to be loose at the front of the refrigerator for connecting to the refrigerator.

5.Connect the 7 ft (2.13 m) flexible codes approved water supply line to the refrigerator.

NOTE: If the main water shutoff valve is behind the refrigerator, a secondary water shutoff valve may be installed in line with the water supply line at the front of the product.

7.

Slip the compression sleeve and compression nut on the

 

copper tubing as shown. Insert the end of the tubing into the

 

outlet end squarely as far as it will go. Screw compression nut

 

onto outlet end with adjustable wrench. Do not overtighten

 

the clamp or the sleeve. This will crush the copper tubing.

8.

Turn off the shutoff valve on the water pipe. Coil the copper

 

tubing.

9.

Connect the flexible, codes approved water supply line to the

 

water shutoff valve by threading the provided nut onto the

 

shutoff valve.

10.

Place the end of the tubing into a bucket, and turn shutoff

 

valve ON.

11.

Check for leaks around the saddle valve. Tighten any nuts or

C

B

A

D

E

F G

connections (including connections at the valve) that leak.

A. Household water line

E. Bulb

B. Nut (purchased)

F. Nut

C. Ferrule (purchased)

G. Refrigerator water tubing

D. Coupling

 

6.Turn on the water supply valve and check all connections for leaks.

16

Page 15 Page 17
Page 16
Image 16
Jenn-Air W10379136B manual Style 2-Copper Line Connection, Parts Supplied, Connect to Refrigerator
Page 15 Page 17

W10379136B specifications

The Jenn-Air W10379136B is a state-of-the-art wall oven that epitomizes precision, customization, and luxury in home cooking. This model is designed to cater to the needs of modern chefs who demand both aesthetics and functionality in their kitchen appliances. With its sleek stainless steel finish and built-in design, the W10379136B seamlessly integrates into any kitchen décor, enhancing sophistication and elegance.

One of the standout features of the W10379136B is its advanced True Convection technology. This innovative cooking method utilizes a powerful fan and a third heating element to distribute heat evenly throughout the oven. This ensures that food cooks uniformly, reducing cooking times and enhancing the flavor and texture of dishes. Whether baking bread, roasting meats, or preparing casseroles, users can expect exceptional results every time.

Additionally, the Jenn-Air W10379136B boasts a range of innovative cooking modes, including True Hide and Steam Bake options. The True Hide feature allows users to bake or broil in perfect harmony, while the Steam Bake option introduces moisture during the baking process, creating a crusty exterior and a moist interior for artisanal breads and pastries. With these options, home chefs can experiment with various cooking techniques and achieve restaurant-quality results.

The oven’s precision temperature management is another notable technology that sets it apart. The advanced temperature sensor continuously monitors the internal environment, adjusting heat output as needed. This ensures accurate cooking temperatures, which is vital for delicate recipes and precision cooking. The W10379136B also features a user-friendly touchscreen interface, making it easy to navigate through cooking options, set timers, and monitor progress.

In terms of design, the Jenn-Air W10379136B emphasizes thoughtful engineering with its quiet operation and easy-cleaning features. The self-cleaning cycle simplifies maintenance, while the soft-close door adds a touch of elegance and convenience. Additionally, with a spacious interior, this oven provides ample space to accommodate large dishes, making it ideal for family gatherings and entertaining.

In conclusion, the Jenn-Air W10379136B is a premium wall oven that combines elegant design with cutting-edge technology. Its features like True Convection cooking, precise temperature management, and versatile cooking modes make it an essential tool for any culinary enthusiast. With this appliance, users can elevate their cooking experience and impress family and friends with expertly prepared meals.
Top Page Image Contents