■After the refrigerator is leveled and aligned, remove the installation block from the door hinge and use it to check the spacing between the panels and adjacent cabinets.

NOTE: The installation block is designed to provide accurate spacing for ³⁄₄" (1.9 cm), ³⁄₈" (9.53 mm) and ¹⁄₈" (3.18 mm).

After moving the refrigerator to its final location:

1.Use a ⁵⁄₁₆" socket driver to turn the leveling bolts clockwise to extend the legs to the floor as shown. The rollers should be off the floor.

³⁄₄"

¹⁄₈"

(1.9 cm)

(3.18 mm)

 

³⁄₈"

(9.53 mm)

1.Place top of cardboard carton or plywood under refrigerator. Remove dolly.

2.Move the refrigerator straight back and evenly into the opening. Be sure that the water tubing is not kinked and the power supply cord is on top of the refrigerator.

NOTE: If the power supply cord is behind the refrigerator, it will not install properly.

3.Make sure the installation block is flush with the adjacent cabinets.

NOTE: To achieve a flush installation, it is critical to verify a ³⁄₄" (1.9 cm) depth from the front face of the adjacent cabinetry to the refrigerator.

A

B

³⁄₄" (1.9 cm)

C

A. Adjacent cabinet or wall

B. Installation block

C. Face of refrigerator

Level and Align Refrigerator

WARNING

Tip Over Hazard

Refrigerator is top heavy and tips easily when not completely installed.

Keep doors taped closed until refrigerator is completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

IMPORTANT: All four leveling legs must contact the floor to support and stabilize the full weight of refrigerator. Rollers are for moving the refrigerator, not for permanent support.

A B

A

B

A. Rear leveling bolt

B. Front leveling bolt

2.Adjust the leveling legs to level and align the refrigerator from left to right and front to back so that the refrigerator is level and aligned with the cabinets.

3.Continue adjusting all of the leveling legs to raise the refrigerator until the top is within at least ¹⁄₄" (6.35 mm) of the top soffit as shown.

NOTE: If an anti-tip board has been used, adjust the leveling legs until the top of the refrigerator is making contact with the bottom of the anti-tip board(s). Do not crush the compressor cover.

A B

C

¹⁄₄" (6 mm) max.

2" (5 cm)

84"

(213.4 cm)

D

E

A. Center board ¹⁄₄" (6.35 mm) max. above refrigerator

B. Two 2" x 4" x 32" (5 cm x 10 cm x 81 cm) boards

C. Attach to studs with six #8 x 3" (7.6 cm) screws

D. Compressor cover

E. Distance from bottom of anti-tip board to floor

IMPORTANT: Adjust in small increments to keep from damaging the cabinet trim and causing problems with the door alignment or top grille fit. To avoid damage to the cabinet or leveling legs, do not apply more than 50 inch- pounds (5.65 Nm) of torque to the leveling bolts. The leveling legs can be extended to a maximum of 1¹⁄₄" (3.18 cm) below the rollers.

4.After leveling the refrigerator, again use a straight edge or 4-ft level across the front of the refrigerator installation blocks to the cabinets to check that the refrigerator is still flush.

18

Page 17 Page 19
Page 18
Image 18
Jenn-Air W10379136B manual Level and Align Refrigerator
Page 17 Page 19

W10379136B specifications

The Jenn-Air W10379136B is a state-of-the-art wall oven that epitomizes precision, customization, and luxury in home cooking. This model is designed to cater to the needs of modern chefs who demand both aesthetics and functionality in their kitchen appliances. With its sleek stainless steel finish and built-in design, the W10379136B seamlessly integrates into any kitchen décor, enhancing sophistication and elegance.

One of the standout features of the W10379136B is its advanced True Convection technology. This innovative cooking method utilizes a powerful fan and a third heating element to distribute heat evenly throughout the oven. This ensures that food cooks uniformly, reducing cooking times and enhancing the flavor and texture of dishes. Whether baking bread, roasting meats, or preparing casseroles, users can expect exceptional results every time.

Additionally, the Jenn-Air W10379136B boasts a range of innovative cooking modes, including True Hide and Steam Bake options. The True Hide feature allows users to bake or broil in perfect harmony, while the Steam Bake option introduces moisture during the baking process, creating a crusty exterior and a moist interior for artisanal breads and pastries. With these options, home chefs can experiment with various cooking techniques and achieve restaurant-quality results.

The oven’s precision temperature management is another notable technology that sets it apart. The advanced temperature sensor continuously monitors the internal environment, adjusting heat output as needed. This ensures accurate cooking temperatures, which is vital for delicate recipes and precision cooking. The W10379136B also features a user-friendly touchscreen interface, making it easy to navigate through cooking options, set timers, and monitor progress.

In terms of design, the Jenn-Air W10379136B emphasizes thoughtful engineering with its quiet operation and easy-cleaning features. The self-cleaning cycle simplifies maintenance, while the soft-close door adds a touch of elegance and convenience. Additionally, with a spacious interior, this oven provides ample space to accommodate large dishes, making it ideal for family gatherings and entertaining.

In conclusion, the Jenn-Air W10379136B is a premium wall oven that combines elegant design with cutting-edge technology. Its features like True Convection cooking, precise temperature management, and versatile cooking modes make it an essential tool for any culinary enthusiast. With this appliance, users can elevate their cooking experience and impress family and friends with expertly prepared meals.
Top Page Image Contents