Jenoptik 5.0z3 manual Using the Macro mode, Sec

RECORDING

Display	Option	Description
-	Single shot	Record a single image.
2	2-SEC	The shutter release will be
		delay for 2 seconds.
10	10-SEC	The shutter release will be
		delay for 10 seconds.
		Record two images in a shot
	Double	after pressing the shutter
		release button 10 and 12
		seconds.
	Burst	For capturing 4 images in
		succession.

4. Shoot the image.

Each option automatically switches to single shot in the following situation:

•After each shot.

•When the mode switched.

•When the camera is turned off.

Note:

•When using the self-timer function, be sure to use a tripod or place the digital camera on a level, stable surface.

•This function is not available to resolution 8M.

Using the Macro mode

Your camera is equipped with a macro function that allows you to focus on very close subjects. In macro mode you can focus on subjects 5 cm from the lens when in the maximum wide angle (zoomed out) setting and 50 cm in the maximum telephoto (zoomed in) setting.

1.	Set the camera to the Record mode .
	• You can use the macro mode in still image shooting or movie
	recording.
2.	Press the	button to enter the macro mode.
	• The macro mode icon (		) appears on the LCD monitor.
3.	To leave the macro mode, press the			button again.
				Macro

Note:

• Distances referred to measure the distance between the camera lens surface and the subject.

13