MAKING CONNECTIONS
FORMATTING THE MEMORY
To erase all data stored in the memory card if you are using a card, or all data stored in the internal memory if there is no card inserted.
1.Set the camera to the Setup Menu .
2.Press 
or 
to select FORMAT ( 
) then press 
or the SET button.
3.Press the SET button to start format, or press the MENU button to cancel it.
•A “BUSY...PLEASE WAIT” message displays and the memory card is starting format.
•A “COMPLETED” message displays when finish formatting.
Note:
•All data will be deleted including protected ones. Be sure to download important files to your computer before formatting.
RESETTING TO DEFAULT SETTINGS
You can reset the entire menu and button operation settings to initial default.
1.Set the camera to the Setup Menu.
2.Press 
or 
to select RESET ALL ( 
) then press 
or the SET button to launch the submenu.
3.Press 
or 
to select YES then press the SET button to reset all settings.
Note:
The following settings do not change with this procedure:
•Date & Time setting
•Language setting
•TV out setting
MAKING CONNECTIONS
CONNECTING THE CAMERA TO A TV
Images displayed on the camera’s monitor screen can also be displayed on a television.
1.Use the included audio/video cable to connect the camera to the TV set.
2.Set the TV input signal to Video In. Refer to the documentation included with your TV for more information.
3.Everything that would normally appear on the camera’s LCD screen, such as photo and video clip playback, slide shows, and image or video capture, appears on the TV.
Note:
• The camera LCD screen turns off automatically during video output.
26
