Jensen KT7015A owner manual Rotate

Rotate	90°
	180°
	270°

Slideshow	Yes
	No
Print	Yes
	No

Setup menu:

The same as Capture mode. ◆Menu operation

Main operations are the same as those of capture mode menu. “Set Logo”, “Rotate” and “Print” are only valid to pictures.

Set Logo: using the option can set current photo as switch-on image. To cancel the set switch-on image, choose one image in playback mode and then press MENU key to open the playback menu, choose “Set Logo” submenu, choose “No”, then press OK key to confirm. When the camera is switched on a second time, the switch-on image will be restored to be default image.

Print: In the playback mode, choose the picture to be printed, press MENU key to open the menu and choose “Print”. Press Right direction key to enter “Print” submenu, choose “Yes” and press OK key to confirm. Within 5s, use USB cable to connect the printer supporting PictBridge protocol (the printer has the mark of ) to start printing.

Tip: When the menu turns gray, it indicates that this menu cannot be used in the current state.

29