Jet Tools GH-1340W, GH-1440W - page 10

1
0
3. Apron - oil must be up to i ndicator mark in
oil sight glass (A, Fig. 6). Top off with
Mobil DTEOil Heavy M edium. Remov e
oil cap (B, Fig. 6) on top of apron to fill. To
drain, remove drain plug on bottom of
apron. Drain oil completely and refill after
the first month of operation. Then, change
oil in the apron annually.
4. Leadscrew Feed Rod - lubricate ball oiler
(A, Fig. 7) on leadscrew/feed rod bracket
with Mobil DTEOil Heavy Medium once
daily.
5. Tailstock- lubricat e two ball oilers
(B,Fig. 7) on tailstockwith Mobil DTE
Oil Heavy Me dium once dail y.
6. Cross Slide - lubricate four ball oilers
(A,Fig. 8) with Mobil DTEOil Heavy
Medium once daily.
7. CompoundRest - lubricate one ball oiler
(B,Fig. 8) with Mobil DTEOil Heavy
Medium once daily.
8. Carriage - lubricate four ball oilers
(D,Fig. 8) with Mobil DTEOil Heavy
Medium once daily.