John Lewis JLBIDO913 instruction manual Installation

Installation

•The set-up of the electrical installation is arranged so that the appliance can be isolated from the mains with a minimum 3

mm all-pole contact separation. Suitable isolation devices include, for example, circuit breakers, fuses (screw type fuses are to be removed from the holder), RCDs and contactors.

•Anti-shock protection must be provided by the installation.

•The built-in unit must meet the stability requirements of DIN 68930.

•Built-in cookers and cooking surfaces are equipped with special attachment systems. For safety reasons, they must only be

combined with appliances from the same manufacturer.

The use of heat protection strips is prohibited for cookers and ovens with Pyrolytic Cleaning, if the recess has a rear wall and closed ground-level compartment. However installation is possible with a ground-level compartment that has been shortened by at least 20 mm and which has base ventilation of the same cross-section.

34