Clock Functions

1 2 3 4

7 6 5

1Time

2Cook time

3End time

4Countdown

5TIME FUNCTIONS button

6Selection button (Plus)

7Selection button (Minus)

Countdown

To set a countdown. A signal sounds after the time has elapsed.

This function does not affect the functioning of the oven.

Cook time

To set how long the oven is to be in use.

End time

To set when the oven is to switch off again.

Time

To set, change or check the time (See also section “Before Using for the First Time”).

How to use the clock functions

After a clock function has been selected, the corresponding function flashes for about 5 seconds. During this period, the

desired times can be set or modified using the or button.

When the desired time has been set, the function continues to flash for approx. 5 seconds. After that the function is then lit. The set time begins to run.

With Countdown the oven must also be switched on in order to set the clock function.

• By pressing and at the same time, the time set can be reset.

Checking the time set or remaining Press the Selection button repeatedly, until the appropriate clock function flashes and the time set or remaining is displayed.

Using residual heat with the

Cook time and End time

clock functions

When the Cook time and End

time clock functions are used, the oven switches the heating elements off, when 90% of the time set or calculated has elapsed. The residual heat present is used to continue the cooking process until the time set has elapsed (3 to 20 mins.).

Countdown

1.Press the "TIME FUNCTIONS" button repeatedly until Countdown flashes.

2.Set the desired Countdown using the or button.

After about 5 seconds the display shows

the time remaining. Countdown lights up. When 90% of the time set has elapsed, an audible signal sounds.

12

Page 12
Image 12
John Lewis JLBIDO913 instruction manual Clock Functions, Countdown