Juniper Networks 5000 SERIES manual NetScreen-5200 Mid-Mount, NetScreen-5400 Front Mount

Chapter 2 Installing the Device

NetScreen-5200 Mid-Mount

To mid-mount the NetScreen-5200, you need four fitted screws, a Phillips-head screwdriver, and brackets.

To mid-mount the NetScreen-5200:

1.Screw the left and right brackets to the middle of each side of the chassis, as shown below.

2.Screw the left and right brackets to the rack.

NetScreen-5400 Front Mount

To front mount the NetScreen-5400, you need four fitted screws, a Phillips-head screwdriver, and brackets.

To front mount the device:

1.Screw the front mount bracket to the front of the chassis, as shown below.

2.Screw the left and right brackets to the rack.

16 User’s Guide