Juniper Networks 500, 5200, 208, 204, 5XT, 5400 manual Known Issues from ScreenOS 5.0.0r8

Juniper Networks NetScreen Release Notes

•03504 – The value of the sysUpTime variable from an SNMP query incorrectly displays as more than 497 days.

•03495 – When the device drops packets after you issued the set flow tcp- syn-checkcommand, ScreenOS does not log the drop instances.

•03492 – When you enable the URL filtering service, the device drops HTTP Move packets.

•03484 – If an interface rapidly repeatedly disconnects and reconnects, the number of OSPF routes drops below the number of expected routes causing the OSPF routing instance to clear its route table.

•02751 – After resubmitting the ICMP destination unreachable setting through the device, the packet passes through the device, but the device generates the following log message:

Apr 21 20:07:41 10.155.132.247 Iapetus: NetScreen device_id=Iapetus system-notification-00257(traffic):

start_time="2004-04-21 21:12:34" duration=0 policy_id=22 service=icmp proto=1 src zone=Trust dst zone=Trust

action=Permit sent=0 rcvd=0 src=69.91.47.31 dst=128.157.5.23 icmp type=8 session_id=19178

5.3.2 Known Issues from ScreenOS 5.0.0r8

•03153 – When you attempt to download plugin and main program files in one file, the system generates errors.

•03065 – When you download the asset recovery log from the WebUI, it appears with the incorrect date and time with the date being seven years different than the correct date.

•02927 – Devices upload HTTP traffic very slowly after you enable both the anti-virus and URL filtering options in a policy on the device.

•02869 – A Juniper NetScreen-5GT cannot deliver mail and the POP3 (Post Office Protocol 3) session times out when the device runs an anti-virus scan on an SMTP or POP3 policy.

•02297 – An anti-virus scan drops connections with selected HTTP and HTTPS sites.

•02266 – When you make one configuration change on a device, the device sometimes sends out more than one entry associated with that change to both the syslog and WebTrends servers.

•01237 – In an NSRP configuration of two Juniper NetScreen-200 devices, you cannot save a device configuration from flash memory on the device to slot 1.

ScreenOS 5.0.0r9-FIPS P/N 093-1638-000, Rev. A Page 33 of 42