JVC 0307MNH-SW-BJ, CU-VD40U Getting Started, Accessories, Placing the Burner, Inserting a Disc

Getting Started

Accessories

Power cord	USB cable	Audio/Video	AC adapter	Stand
		cable	(AP-V400U)

EN

FR

ES

Remote control	DVD-ROM	Recording disc (DVD-R DL)
(RM-V41U)		(For use with high definition Everio Camera.
		Cannot be used with an Everio Camera.)

Lithium Battery (CR2025) Pre-installed in the remote control unit.

CAUTION:

zDo not use the provided AC adapter and power cord with other devices. In addition, do not USB cable other than those provided with this burner. Doing so may result in electric shock

use AC adapter, power cord and or fire.

Placing the Burner

„Horizontal orientation

z Take note of the top and bottom of the burner and place it in the horizontal orientation.

„Vertical orientation

z When using in the vertical orientation, align the vent of the burner with that of the provided stand, then place and fix the burner securely on the stand.

Bottom surface

Stand (provided)

Vent

Inserting a Disc

When handling a disc, be sure not to touch the playback/recording side of the disc.

Use only the [M] button on the burner or the remote control to eject the disc tray. If you open the tray manually, there is a risk of the disc dropping out or getting caught.

„ Horizontal orientation „ Vertical orientation

Preparing the Remote Control

A battery is included inside the remote control at the time of purchase. Remove the insulation sheet before use.

„To Reinsert the Battery

z Pull out the battery holder by pressing the lock tab.	Lithium Battery
	(CR2025)

Lock Tab

7