JVC DR-M70SEK manual Marker Setup, During playback, press Zoom

Zoom

Video	VR
DVD-V DVD-RW	DVD-RW DVD-R

DVD+RW DVD+R VCD JPEG

1 During playback, press [ZOOM].

1 1 0:00:00 DVD-Video

1.2

1.5 2.0

Four options are available, x1.0, x1.2, x1.5 and x2.0. These are displayed excluding the current zoom rate.

Hint

•You can also select the zoom function by pressing [ON SCREEN]. In this case, press [ON SCREEN] first, select the icon using [Cursor L / P], and then press [ENTER].

2 Select the desired zoom factor to zoom using [Cursor U / D], then press [ENTER].

The zoom area is displayed.

3 Select the desired zoom position using [Cursor U / D / L / P], then press [ENTER].

Zoom playback will start.

Hint

•To exit the zoom menu, press [ZOOM] at step 1.

•To cancel the zoom function, select x1.0 using [Cursor U / D], then press [ENTER].

Note

•If selecting a smaller factor than that currently selected, the zoom area is not displayed.

•You cannot slide the zoomed picture on some JPEG files.

Marker Setup

Video	VR
DVD-V DVD-RW	DVD-RW DVD-R

DVD+RW DVD+R CD VCD

(PBC OFF)

You can assign a specific point on a disc to return later.

1 During playback, press [ON SCREEN].

2 Select the icon using

[Cursor L / P], then press [ENTER].

Marker setup menu for DVD-Video mode

1 1 0:00:00 DVD-Video

Marker setup menu for Audio CD mode

1 0:00:00 Audio CD

3 Select the desired marker number using [Cursor U / D]. When the disc reaches the desired point, press [ENTER].

The title (track) number and the time are displayed.

4 To return to the marker later, select the desired marker number using [Cursor U / D], then press [ENTER].

Hint

• To clear a marker, select the marker number you

wish to clear, then press [CLEAR].

• You can mark up to 6 points.

Note

• All markers are erased when you perform the

following operations.

- Open the disc tray.

- Turn off the power.

- Record on a recordable disc.

- Change the mode between Original and Playlist.

(VR mode)

Playing back discs

EN 39