JVC DR-M70SEK manual Digital audio for better sound quality, After you have completed connections

Recording from a camcorder or other Audio-Video equipment with no Scart output jack (AV3 or AV4)

If no S-Video input jack is available, connect to VIDEO input jack on the front panel using an RCA Video cable.

Change the setup when using S-VIDEO input jack. (See page 30.)

AV3 (Rear) AV4 (Front)

Connecting a Dolby Digital™ decoder, DTS decoder or MPEG decoder

• Connecting multi-channel Dolby Digital decoder

allows you to enjoy the 5.1ch Dolby Digital surround

system as well as DTS decoder, 5.1 channel

surround system.

• After connecting to a Dolby Digital decoder, set

“Dolby Digital” to “Stream” in the AUDIO menu. (See

page 57.)

• After connecting to a DTS decoder, set “DTS” to

“ON” in the AUDIO menu. (See page 57.)

Getting Started

S-VIDEO

OUT IN (AV3)

S-Video cable (not supplied)

AUDIO IN	PR	/I STANDBY/ON
	ANALOG
(AV3)	AUDIO OUT
L	L DIGITAL AUDIO OUTPUT	S-VIDEO VIDEO (MONO) L _AUDIO _R
	PCM/BITSTREAM

REC SPEED

R COAXIAL

Audio cable	Audio
(not supplied)	cable
	(not
S-Video	supplied)
cable (not
supplied)

• After connecting to a MPEG decoder, set “MPEG” to

“Stream” in the AUDIO menu. (See page 57.)

Connecting to an MD deck or DAT deck

• The audio source recorded in Dolby Digital 5.1

channel surround format cannot be recorded using

an MD or DAT deck as a digital sound.

• If not connected to a Dolby Digital decoder, set

“Dolby Digital” to “PCM” in the AUDIO menu.

Playing back a DVD using incorrect settings may

generate noise distortion, and damage speakers.

S-VIDEO	AUDIO	S-VIDEO	AUDIO
OUT	OUT	OUT	OUT

Digital audio for better sound quality

Dolby Digital decoder,	Digital audio
DTS decoder or
	input jack
MPEG decoder, etc.
		COAXIAL

DIGITAL AUDIO OUTPUT

PCM/BITSTREAM

COAXIAL	Coaxial cable
	(not supplied)

S-VIDEO	AUDIO IN	ANALOG
	(AV3)	AUDIO OUT
OUT IN (AV3)	L	L DIGITAL AUDIO OUTPUT
		PCM/BITSTREAM
	R	R COAXIAL

The connections illustrated above are optional for better sound.

1 For clear digital sound quality, use the DIGITAL AUDIO OUTPUT PCM/ BITSTREAM (COAXIAL) jack to connect your digital audio equipment.

If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

• Set “Dolby Digital,” and “MPEG” to “PCM” and set

“DTS” to “OFF” in the AUDIO menu for connecting

to an MD or DAT deck.

• You can use ANALOG AUDIO OUT jacks for the

connection of your audio system.

After you have completed connections

Switch the input selector on your TV to an appropriate external input channel. For details, refer to the Instruction Manual of your TV.

Note

•Connect this unit directly to the TV. If the Audio/ Video cables are connected to a VCR, pictures may be distorted due to the effects of the copy protection system.

16 EN