JVC DR-M70SEK manual Timer recording using the Video Plus+ system, Code Error is displayed if

• If your local channel information is programmed in the unit’s memory, your local channel number appears automatically.

• If your local channel information is not programmed in the unit’s memory, “P– –” may appear.

• If you select the channel number using [Cursor U / D], it is stored in the unit’s memory.

5 Select a recording speed using [Cursor U / D], then press [Cursor P].

6 Press [SET UP] or

[the VIDEO Plus+ button] to exit.

7 Press [STANDBY/ON y/I].

The icon will appear on the front panel display and the unit enters to the timer-standby mode.

Date

1. Daily

2. - - -

3. - - -

4. - - -

5. - - -

6. - - -

7. - - -

8. - - -

Recording

Timer recording using the VIDEO Plus+® system

You can programme the timer using the PlusCode numbers that are printed in your local TV guide magazine.

1 In stop mode, press [the VIDEO Plus+ button].

•If the Timer Programming list is full, the Timer Programming mode is activated instead of the VIDEO Plus+ programming mode.

•Press [the VIDEO Plus+ button] again in the VIDEO Plus+ programming mode to switch to the Timer Programming mode.

2 Set the PlusCode number of the programme you want to record using [the Number buttons], then press [ENTER].

VIDEO Plus+ System

Please enter a PlusCode No.

- - - - - - - - -

4 Select a recording channel using [Cursor U / D], then press [Cursor P].

Timer Programming

Start	End	CH	Speed
7:30	14:15	P08	LP

3 Select the desired recording pattern

using [Cursor U / D], then press [ENTER].

VIDEO Plus+ System

Once

Daily

M-F

Weekly

Once: To record a TV programme once, as you set.

Daily: To record a TV programme at the same time on the same channel everyday.

M-F:To record a TV programme at the same time on the same channel from Monday through Friday.

Weekly: To record a TV programme at the same time on the same channel every week.

Note

•If you have not set the clock, the clock setting window will appear after step 1. Continue from step 5 in “Clock Setting” before programming the timer. (See page 19.)

•If the PlusCode number is not available, “Code Error” is displayed and the number will clear when you press [ENTER] in step 2.

•If the PlusCode number previously set overlaps with the one you entered and the channel is different, “Overlap” is displayed but the timer programming will be cleared when you press [ENTER] in step 3.

•If you enter the same PlusCode number and the recording pattern which you have already entered, the previously set programme will be overwritten.

•If you enter the same PlusCode number but a different recording pattern, it will be saved as a new programme and added to the timer programming list.

“Code Error” is displayed if:

•A past time is entered for start and end times.

•The PlusCode number cannot be decoded.

“Overlap” is displayed if:

•There is an overlap with a timer recording setting in different channels.

28 EN