Filename [DR-MH30EU_09Editing.fm]

 

DR-MH30EU_00.book Page 67 Thursday, June 3, 2004 11:00 AM

Masterpage:Right0

 

 

SYSTEM CONNECTIONS EN 67

Connecting To A Satellite Receiver

Simple Connections

Connect the satellite receiver to the L-2 IN/DECODER connector, then connect the L-1 IN/OUT connector to the TV’s connector.

NOTES:

Set “L-2 SELECT” to “VIDEO” or “S-VIDEO”. ( pg. 63)

You can use the Automatic Satellite Programme Recording function ( pg. 50) with this connection.

To record a programme via the satellite receiver, select L-2 mode by pressing PR +/– so that “L-2” appears on the front display panel.

For details, refer to the instruction manual of the satellite receiver.

Outdoor unit

Satellite cable

Aerial

TV aerial cable

Satellite receiver

ANTENNA IN

ANTENNA OUT

TV

IMPORTANT

When you set “L-2 SELECT” to “SAT VIDEO” or “SAT S-VIDEO” ( pg. 63), it is possible to view a satellite broadcast with the TV set to its AV mode even if the unit is turned off. When the unit is in Stop mode or recording, press TV AV/VIDEO on the remote control to turn off the VIDEO lamp on the unit.

If you turn on the unit when the satellite receiver’s power is off, nothing appears on the TV screen. In this case, turn on the satellite receiver, or set the TV to its TV mode, or press TV AV/VIDEO on the remote control to set the unit to the AV mode.

Page 67

Thursday, 3 June 2004 10:46

Page 67
Image 67
JVC DR-MH20B, DR-MH30B manual Connecting To a Satellite Receiver, Simple Connections