JVC DR-MH30B, DR-MH20B manual Pause recording on HDD deck

Filename [DR-MH30EU_06HDD Operation.fm]
DR-MH30EU_00.book Page 40 Thursday, June 3, 2004 11:00 AM				Masterpage:Left0
40 EN BASIC OPERATIONS ON HDD DECK
Basic Recording		Pause recording on HDD deck
		It is not possible to pause recording. Pressing 9 initiates Live
		Memory Playback.
● Turn on the unit.		However, it is still possible to pause recording only when recording
		the channels of external sources (“L-1”, “L-2”, “F-1”, and “DV”).
● Turn on the TV and select the AV mode.		Press and hold 7, then press 9 on the remote. To resume
● Slide the TV/CABLE/SAT/DVD switch to DVD.		recording, press and hold 7, then press 4 on the remote.
		No operation can be made with the buttons on the unit.
ATTENTION:		Recording Mode
The HDD on the unit requires approximately 20 seconds to start up
after the unit has been turned on, during which no operation can be		MPEG2 format is used as recording format. As a guide for picture
made.		quality, the “bps” unit is used to represent how much data can be
		recorded per second. The larger this value is, the better the picture
	HDD	quality becomes but more capacity is required for the recording.
		Select XP or SP for programmes where quick movement occurs,
		such as sports programmes, and LP or EP for talk shows, etc. with
		relatively less movement.
		Recording	Recording amount	Maximum recording
		mode	(approx.)	time (approx.)
8	7	XP	10 Mbps	1 hour
CABLE/DBS		SP	5 Mbps	2 hours
TV	DVD	LP	2 Mbps	4 hours
HDD		EP	1.6 Mbps	6 hours
0-9		FR60–FR360		1 – 6 hours
		( pg. 39) The amount varies
PR+/-		FR420	depending on the	7 hours
			selected time.
		FR480		8 hours

4

8

7

REC MODE

●For details on FR mode, refer to “Free Rate Function” ( pg. 39)

Recording Resume Function

If there is a power outage during recording, Instant Timer Recording (ITR) ( pg. 41) or timer recording ( pg. 46, 48), the

9recording will resume automatically when power is restored to the unit unless the unit’s memory backup has expired.

1 Press HDD so that the HDD lamp lights up on the unit.

2 Press PR +/– or the number keys to select the channel you wish to record.

3 Press REC MODE repeatedly to set the recording mode.

●Each time you press REC MODE, the recording mode changes as follows:

XP ] SP ] LP ] EP ] FR60–FR360* ] FR420, FR480] (Back to the beginning)

*The value is selectable from 1 to 6 hours in 5-min. increment by pressing w e repeatedly after selecting “FR60–FR360”. To change the value in 30-min. increments, press and hold w e.

●For details on the recording mode, see the right column.

4 Press 7 on the unit to start recording. Or press and hold 7 and press 4 on the remote control.

5 Press 8 twice to stop recording.

●Pressing 8 once displays the confirmation message to stop recording. Press 8 again to terminate recording.

NOTE:

Continuous recording for over 48 hours is not possible.

Page 40

Thursday, 3 June 2004 10:46